HeadSet Jabra BlueTooth Easy Voice Original Garansi 1 Tahun Axindo Asli 100% Harga Bukan OEM
Beli Lah Sparepart SmartPhone Anda Yang Original- Demi Kemanan Anda Dan SmartPhone Anda Hanya Di -KaskusKadra.Com-
Easy to use, wear and enjoy
Pair it with two Bluetooth-enabled devices at the same time
Talk for up to 6 hours and get 8 days of standby time
Crystal-clear sound and voice (DSP technology)
Easy to install
To get started enjoying handsfree conversations, you just pair Easyvoice with your device of choice. It gives you voice-guided instructions and tells you once the pairing has been successful.
You can pair it with up to two devices at the same time, so you can use it with your mobile phone and laptop. It even lets you know when it’s time to recharge. If only everything was this easy.
Once you’re up and running, you’ll find that your calls are clearer and crisper on the Easyvoice. It utilises digital signal processing (DSP) to optimise your voice. When you’re in noisy surroundings, the headset automatically adjusts your call volume, maintaining a safe volume level and keeping your conversation clear and understandable. With its comfortable eargels, earhook and lightweight design, you can talk for hours from your car to your office and back again.
Specifications
Connectivity
Wireless Technology: Bluetooth
Supports Bluetooth™ for wireless connectivity
Bluetooth version: N/A
The highest supported Bluetooth® version
AVRCP: No
This device does not support AVRCP, meaning you cannot control your music directly from the device
Auto Pairing: Yes
With Auto Pairing, a device pairs automatically with Bluetooth® devices supporting this feature
Music: Yes
Device can stream music from a source such as a smartphone, Bluetooth-enabled laptop, tablet or MP3 player
Speakers
Frequency Response: Narrowband
Speakers with a narrowband frequency response are capable of producing sound in a range well suited for traditional analogue phone lines
Digital Signal Processing: Yes
Digital Signal Processing (DSP) is a technology that digitally optimises your voice and music and suppresses echoes
Microphone
Microphone Type: Omni Directional/Noise Filter
Enhances call clarity by eliminating background noise from the office.
Microphone Sensitivity: Standard (E-STD)
Standard (STD) variation microphone sensitivity is comparable to a normal telephone receiver and is used in most telephone devices.
Mute function: No
There is no option to “mute/unmute” a conversation directly from the device
Battery & Power
Talk Time: Up to 6 hours
Talk Time is the maximum time you can talk before a device runs out of power
Standby Time: Up to 192hour(s)
Standby Time is the maximum time a device can remain with power on
USB Charging: Yes
USB Charging enables a device to be charged via a USB cable
Design
Wearing Style: In the ear
In the ear devices are worn in the ear
Ear Cushion Type:
Small (S) sized ear gels
Medium (M) sized ear gels
Control
Vibrator: No
There is no vibration function on this device
1. CHARGING YOUR HEADSETTake the AC adapter and plug its charging tip into the socket on the headset.
Plug the end of the AC adapter into a wall outlet.
The headset is fully charged and ready to use when the battery indicator on the StatusDisplay™ turns solid green. (Approx. 2 hours). The battery indicator stays solid green for 5 min. and then goes out.
VBT4050 01 Charging Your Headset
2. TURN YOUR HEADSET ON OR OFF To turn the headset on slide the ON/OFF button towards |.
To turn the headset off slide the ON/OFF button towards 0.
VBT4050 02 Turn Your Headset On Or Off
3. PAIRING YOUR HEADSET WITH YOUR MOBILE PHONEThe first time you turn your headset on, it automatically enters into pairing mode. The Bluetooth connection indicator on the StatusDisplay™ flashes blue.
For later pairing:
make sure the headset is turned on
Press and hold the answer/end button for approximately 5 seconds.
The Bluetooth connection indicator on the StatusDisplay™ flashes blue when the headset is ready for pairing with your phone.
Set your Bluetooth phone to find the headset. Follow your phone’s instruction guide. This usually involves going to a “setup”, “connect” or “Bluetooth” menu on your phone and selecting the option to find or add a Bluetooth device.
Your phone will find the Easyvoice.
Your phone then asks if you want to pair with it. Accept by pressing “yes” or “OK” on the phone. Your phone may ask for a pass key or PIN = 0000 (four zeros).
Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat the steps.
Pairing is successful when the Bluetooth connection indicator and the battery icon show solid light. The lights will stay solid for 5 seconds and then turn off.
If you are wearing the headset, the voice guidance will say “connected”
VBT4050 03 Pairing Your Headset With Your Mobile Phone
4. ACCEPTING A CALL ON THE HEADSETTap the Answer/End button on your headset to answer the call.
VBT4050 04 Accepting A Call On The Headset
5. ENDING A CALL ON THE HEADSETWhen you want to end a call, tap the Answer/End button on your headset.
VBT4050 05 Ending A Call On The Headset
6. TURNING VOLUME UP AND DOWN ON THE HEADSETTo increase volume: tap the button with the + symbol repeatedly until the desired volume is reached.
To decrease the volume: tap the button with the – symbol repeatedly until the desired volume is reached.
VBT4050 06 Turning Volume Up Or Down
7. ALWAYS KNOW YOUR STATUSYou can always get your connection and battery status on the StatusDisplay™ by tapping the volume buttons.
Green battery icon: the headset is turned on and holds above 30 minutes talk time.
Red battery icon: the headset holds below 30 minutes talk time.
The headset has voice guidance. When the headset has less than 30 minutes talk time the voice guidance will say “low battery”. The statement will be repeated every 10 minutes.
Solid icons: when the Bluetooth icon is solid, the headset is connected to your phone. (If the battery indication is lit but there is no Bluetooth indication, the headset is on but not connected to your phone).
When you do not have an active call, you can tap the answer/end button to hear “connected” statement. If your headset is not connected to any phone it will remain quiet.
Flashing Bluetooth icon: the headset is in pairing mode. In this state the headset can be paired (setup) to a new phone. Go to “pairing” in the menu for more information.
VBT4050 07 Always Know Your Status
8. MULTIUSE™ The headset pairs up to 8 devices. 2 at any given time. In order to use the headset with two phones/or a phone and a laptop you must “pair” both phones with the headset (go to the guide “pairing” to see how).
When both phones are paired to the Easyvoice simply turn on Bluetooth on both devices and turn on the headset.
Easyvoice automatically switches to the receiving device when a call comes in and back again when the conversation is ended.
VBT4050 08 Multiuse
9. WEARING STYLESThe Easyvoice can be worn on either ear with or without an earhook.
When you open the packaging the first time you will find the headset fitted with a standard Jabra eargel and a S/M size earhook. If you find that the earhook is too small there is a size L in the pack that you can replace it with.
If you prefer to wear the headset without the earhook, we recommend that remove the earhook and replace the eargel with one of the two “Ultimate Comfort Eargels™” that are included in the pack.
With earhook
Gently wrap the earhook behind your ear and fit the speaker into the ear.
With Ultimate Comfort Eargel™
Fit the speaker in your ear.
The post HeadSet Jabra BlueTooth Easy Voice Original Garansi Axindo appeared first on KaskusKadra Store.